Husqvarna 326HS99 - Manual (Page 21)

English – 21
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
Technical data 326HS75 326HS99
Engine
Cylinder displacement, cu.in/cm 3 1,50/24,5 1,50/24,5
Cylinder bore, inch/mm 1,34/34,0 1,34/34,0
Stroke, inch/mm 1,06/27 1,06/27
Idle speed, rpm 2700 2700
Recommended max. fast idle speed, rpm 11000-12600 11000-12600
Max. engine output, acc. to ISO 8893, kW/ rpm 0,9/9000 0,9/9000
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB
Spark plug Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, Lbs/kg 12,3/5,6 13,0/5,9
Sound levels
(see note 1)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
96 97
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
Idle speed, rear/front handles: 3,3/3,6 3,3/3,6
Max. speed, rear/front handles: 7,1/6,2 7,1/6,2
Blades
Length, mm 720 1000
Blade speed, cuts/min 4695 4695