Replacement of fuel filter, Checking the fuel pump’s air filter, Checking the tyre pressure – Husqvarna 16 AWD User Manual

Page 25: Maintenance

Advertising
background image

English

– 25

Maintenance

Replacement of fuel filter

Replace the fuel filter every 100 running hours (once per
season) or more frequently if it is clogged.

Replace the filter as follows:

1

Open the engine cover.

2

Move the hose clips away from the filter. Use a pair of flat
pliers.

3

Pull off the filter from the hose ends.

4

Press the new filter into the ends of the hoses. If
necessary apply liquid detergent to the ends of the filter to
facilitate connection.

5

Push the hose clips back on the filter and tighten.

Checking the fuel pump’s air filter

Check regularly that the fuel pump’s air filter is free from dirt.

The filter can when necessary be cleaned with a brush.

Checking the tyre pressure

The tyre pressure should be 60 kPa / 0.6 bar / 9 PSI on all
wheels. In order to improve drive power, the pressure in the
rear tyres can be reduced to 40 kPa / 0.4 bar / 6 PSI.

Controlling the acid level in a dry-
charged battery

Check that the level of the battery acid lies between the
markings.

When refilling, only distilled water may be used to fill the cells.

IMPORTANT INFORMATION Different tyre pressures on
the front tyres will result in the blades cutting the grass at
different heights.

!

WARNING! Procedures on contact with acid

External: Rinse well with plenty of water.

Internal: Drink large quantities of water or
milk. Contact a doctor as soon as possible.

Eyes: Rinse well with plenty of water.
Contact a doctor as soon as possible.

Batteries emit explosive gas. Sparks, flames
and cigarettes must absolutely not be
brought into the vicinity of the battery.

Advertising
This manual is related to the following products: