HP 1005 Series - Manual (Page 15)

ENWW Troubleshooting the printer 13
Troubleshooting the printer
If the top status light is on, the printer is ready to print.
If no status lights are on, check the power cord and the printer cable connections.
CAUTION Before you connect the cable to the printer, always unplug the printer. Otherwise, the printer might
be damaged.
Installation is complete
Congratulations! Your HP LaserJet 1005 Series Printer is ready to use. If you had any problems,
see
Troubleshooting the printer or go to HP’s support Web site at
http://www.hp.com/support/lj1005 .