Huawei AOLYNK WDR814IG - Manual (Page 14)

Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual 2 Hardware Installation & Setup
11
detailed information about configuring TCP/IP, hardware installation and so on.
2.2 Front Panel LEDs
The following figure shows the front view of the ADSL Wireless Router. The LEDs on
the front panel indicate the status of the unit. You can easily view the operation of your
High-Performance Wireless Router from this panel.
& Note:
Please refer to the model on your hand to find proper description.
The LEDs on the front panel indicate the status of the unit. You can easily view the
operation of your ADSL Wireless Router from this panel.
LED Status Description
ON
Power has been switched on and is working
normally
Power
OFF Power is switched off or fails.
Diag - For factory test only
ON ADSL loop is brought UP.
Blinking Startup. Link
OFF ADSL loop is down.
Blinking
Data is being transmitted or received through
ADSL.
Act
OFF No data transmission activities present on the link.
ON Wireless connection established
Wireless
OFF Wireless function disabled
ON USB connection established
USB
OFF No USB cable connected