Huawei AOLYNK WDR814IG - Manual (Page 35)

Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual 3 Internet Access
32
DHCP
Server: Keep the default, Enable, to enable the Router' DHCP
server option. If you already have a DHCP server on your
network or you do not want a DHCP server, then select
Disable.
Starting IP
Address: Enter a numerical value for the DHCP server to start with
when issuing IP addresses. Do not start with 192.168.1.1
(the IP address of the Router).
Maximum
Number of
DHCP Users Enter the maximum number of PCs that you want the
DHCP server to assign IP addresses to. The absolute
maximum is 253--possible if 192.168.1.2 is your starting IP
address.
Client Lease
Time The Client Lease Time is the amount of time a network
user will be allowed to connect to the Router with their
current dynamic IP address. Enter the amount of time, in
minutes, that the user will be "leased" this dynamic IP
address.
Static DNS
1-3 The Domain Name System (DNS) is how the Internet
translates domain or website names into Internet
addresses or URLs. Your ISP will provide you with at least
one DNS Server IP Address. If you wish to utilize another,
enter that IP Address in one of these fields. You can enter
up to three DNS Server IP Addresses here. The Router will
utilize these for quicker access to functioning DNS servers.
WINS The Windows Internet Naming Service (WINS) manages
each PC's interaction with the Internet. If you use a WINS
server, enter that server's IP Address here. Otherwise,
leave this blank.
3.5.2 Routing Setting
To make the internet connection more secure, the NAT operating mode is strongly
recommended to be enabled. Because the hacker might directly enter your PC