HP Officejet 6000 User Manual

Page 111

Advertising
background image

connecting to the HP device, make sure the correct version of the printer driver is set as
the default.
1. Click Start, point to Settings, and then click Printers or Printers and Faxes.

- Or -
Click Start, click Control Panel, and then double-click Printers.

2. Determine if the version of the printer driver in the Printers or Printers and Faxes

folder is connected wirelessly:
a. Right-click the printer icon, and then click Properties, Document Defaults, or

Printing Preferences.

b. On the Ports tab, look for a port in the list with a checkmark. The version of the

printer driver that is connected wirelessly has Standard TCP/IP Port as the Port
description, next to the checkmark.

3. Right-click the printer icon for the version of the printer driver that is connected

wirelessly and select Set as Default Printer.

NOTE: If there is more than one icon in the folder for the HP device, right-click the
printer icon for the version of the printer driver that is connected wirelessly and select
Set as Default Printer.

Make sure the HP Network Devices Support service is running (Windows only)

To restart the HP Network Device Support service
1.
Delete any print jobs currently in the print queue.
2. On the desktop, right-click My Computer or Computer, and then click Manage.
3. Double-click Services and Applications, and then click Services.
4. Scroll down the list of services, right click HP Network Devices Support, and then

click Restart.

5. After the service restarts, try using the HP device over the network again.
If you are able to use the HP device over the network, your network setup was successful.
If you still cannot use the HP device over the network or if you have to periodically perform
this step in order to use your device over the network, your firewall might be interfering.
If this still does not work, there might be a problem with your network configuration or
router. Contact the person who set up your network or the router manufacturer for help.

Add hardware addresses to a wireless access point (WAP)
MAC filtering is a security feature in which a wireless access point (WAP) is configured
with a list of MAC addresses (also called “hardware addresses”) of devices that are
allowed to gain access to the network through the WAP. If the WAP does not have the
hardware address of a device attempting to access the network, the WAP denies the
device access to the network. If the WAP filters MAC addresses, then the device’s MAC
address must be added to the WAP’s list of accepted MAC addresses.

Print the network configuration page. For more information, see

Understand the

network configuration or wireless status report

.

Open the WAP’s configuration utility, and add the device’s hardware address to the
list of accepted MAC addresses.

Solve wireless problems

107

Advertising