HP 7200 User Manual
Page 137
Note
If the computer acting as a gateway is turned off, the other computers
on the network will lose their Internet connection. The HP All-in-One will not
support Internet-related functions.
If you use this configuration, connect your HP All-in-One to the switch or router with
an Ethernet cable. For connection instructions, see
Connect to an Ethernet network
.
Ethernet connection to a wired network with modem Internet access
In this example, the network devices are connected to a switch or router, and a
modem (shown here connected to the computer on the left) provides Internet access.
The modem is connected to the computer using a phone cord and jack. Only one
computer has Internet access. Neither the HP All-in-One nor any of the other
computers on the network have access to the Internet. If you use this configuration,
connect your HP All-in-One to the switch or router with an Ethernet cable. For
connection instructions, see
Connect to an Ethernet network
Note
In order to use the HP Instant Share features on your HP All-in-One,
you will need broadband Internet access, such as cable or DSL. For more
information about HP Instant Share, see
Ethernet connection to a wired network without Internet
In this example, the network devices are connected to a switch or router, and there is
no Internet connection. Devices use AutoIP, which means IP addresses are
configured automatically. If you have this configuration, connect your HP All-in-One to
the switch or router with an Ethernet cable. For connection instructions, see
Note
In order to use the HP Instant Share features on your HP All-in-One,
you will need broadband Internet access, such as cable or DSL. For more
information about HP Instant Share, see
Chapter 13
134
HP Officejet 7200 All-in-One series
Set
up
your netw
ork