HP 7200 - Manual (Page 46)

The slots are configured as follows:
●
Top left slot: CompactFlash (I, II)
● Top right slot: Secure Digital, MultiMediaCard (MMC)
● Bottom left slot: SmartMedia, xD-Picture Card (fits in top right of the slot)
● Bottom right slot: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo
(with user-supplied adapter), Memory Stick Pro
● Camera port (below the memory card slots): compatible with any USB-equipped
digital camera that supports PictBridge. Look for the PictBridge icon ( ).
Note The camera port only supports USB-equipped digital cameras that
support PictBridge. It does not support other types of USB devices. If you
attach a USB device that is not a compatible digital camera to the camera port,
an error message appears on the control panel display. If you have an older
HP-brand digital camera, try using the USB cable that came with the camera.
Plug it into the USB port on the back of the HP All-in-One and not into the
camera port near the memory card slots.
Tip By default, Windows XP will format a memory card of 8 MB or less and
64 MB or more with the FAT32 format. Digital cameras and other devices use
the FAT (FAT16 or FAT12) format and cannot operate with a FAT32 formatted
card. Either format your memory card in your camera or select FAT format to
format your memory card in a Windows XP PC.
Transfer digital images to your computer
After you take photos with your digital camera, you can print them immediately or
save them directly to your computer. To save them to your computer, you need to
User Guide 43
Memory
Card and PictBridge