HP 7200 - Manual (Page 68)

Prepare a color iron-on transfer
You can copy an image or text onto an iron-on transfer, then iron it onto a T-shirt,
pillow cover, place mat, or other piece of fabric.
Tip Practice applying an iron-on transfer on an old garment first.
1. Load the iron-on transfer paper in the input tray.
2. Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
3. In the Copy area, press Menu until Copy Paper Type appears.
4. Press to select Iron-On or Iron-On Mirrored , and then press OK .
– Select Iron-On as the paper type if you are using HP Iron-On Transfers for
color fabrics. If you are using HP Iron-On Transfers for color fabrics the
image does not need to be reversed to appear properly on the fabric.
– Select Iron-On Mirrored if you are using HP Iron-On Transfers for light or
white fabrics. The HP All-in-One automatically copies a mirror image of your
original so that it will appear properly when you iron it onto light or white fabric.
5. Press Start Copy Black or Start Copy Color .
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the
settings as defaults.
When you change copy settings from the control panel or the HP Director, the
settings apply only to the current copy job. To apply copy settings to all future copy
jobs, you can save the settings as defaults.
1.
User Guide 65
Use
the
copy
features