Troubleshooting – Philips FC9264 User Manual

Page 15

Advertising
background image

troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If

you are unable to solve the problem with the information below, contact the Consumer Care

Centre in your country.

Problem

Possible cause

Solution

The light in the

AutoClean button

(for types without

display) or the

AutoClean symbol

on the display (for

types with display)

flashes.

The filter cylinder needs

to be cleaned.

Press the AutoClean button to clean the filter

cylinder.

The suction power

is insufficient.

You have selected a low

suction power setting.

Select a higher suction power setting.

The filter cylinder is

clogged with dirt.

Clean the filter cylinder (see chapter ‘Cleaning

and maintenance’).

The motor protection

filter and/or the HEPA

filter are dirty.

Clean or replace the filters (see chapter

‘Cleaning and maintenance’).

The nozzle, hose or

tube is blocked up.

To remove the obstruction, disconnect the

blocked-up item and connect it (as far as

possible) the other way around. Switch on the

vacuum cleaner to force the air through the

blocked-up item in opposite direction.

The infrared remote

control does not

function.

You have not inserted

the batteries properly

or the batteries are

empty.

Insert the batteries properly or replace them.

See chapter ‘Replacement’.

The appliance does

not function and the

standby light on the

cover of the

appliance flashes.

The dust bucket and/or

the filter cylinder unit

are not installed

properly.

Unplug the appliance. Make sure that the filter

cylinder is assembled properly into the filter

cylinder case (‘click’). Also make sure that the

filter cylinder unit is inserted properly into the

dust bucket (‘click’).

The cover is not closed

properly.

Make sure the cover is closed properly. Put the

plug in the wall socket and try again.

When I use my

vacuum cleaner I

sometimes feel

electric shocks.

Your vacuum cleaner

has built up static

electricity. The lower the

air humidity in the

rooms, the more static

electricity the appliance

builds up.

To reduce this inconvenience, we advise you to

discharge the appliance by frequently holding

the tube against other metal objects in the

room (for example legs of a table or chair,

radiator etc.).

English

15

Advertising
This manual is related to the following products: