Fitting the trimmer guard and trimmer head, Guard, Trimmer head – Husqvarna 325LD User Manual
Page 14: Assembly, Fitting the trimmer guard and trimmer head (323c), Fitting the trimmer guard and trimmer head (325cx)
Advertising
14 –
English
ASSEMBLY
Fitting the trimmer guard and
trimmer head (323C)
Guard
•
Fit the guard as shown in the diagram. Tighten securely.
Trimmer head
•
Fit the dust cup on the shaft. The nut must be completely
covered by the dust cup.
•
Hold the dust cup with a spanner to prevent the shaft from
rotating.
•
Screw the trimmer head onto the shaft.
Fitting the trimmer guard and
trimmer head (325Cx)
•
Fit the guard as shown in the diagram. Tighten securely.
•
Insert the locking pin into the hole to lock the axle.
•
Screw the trimmer head onto the shaft.
Advertising
This manual is related to the following products: