HP Vectra 500 Series - Manual (Page 138)

6 Aztech AT3300 Audio Fax/Data Modem
European Firmware and Telephone Line Configuration
138 English
Aztech AT3300 Localisation Utility
The Aztech AT3300 Localisation Utility floppy disk automatically
determines which firmware country code is configured on the Aztech
AT3300 audio fax/data modem, and has the possibility to modify the
configuration.
Using the Aztech AT3300 Localisation Utility
To use the Aztech AT3300 Localisation Utility, the system must be first
shutdown, then rebooted on the Aztech 3300 Localisation Utility floppy
disk.
When the reboot has completed, the Localisation Utility main menu will
appear:
Option 1 - shows the current firmware country code setting on the
Aztech AT3300 audio fax/data modem. A screen similar to the following
example will be displayed:
Option 2 - allows you to modify the country code setting to the desired
configuration. Refer to the table on
page 137 for the different country
code settings.
Aztech AT3300 Localisation Utility
1 - Show current firmware country settings
2 - Set firmware’s country setting
Q - Quit
Pick a command
→
CURRENT COUNTRY CODE SETTING IS:
Portugal (modem country code 012) ; Jumper block colour should be BLUE
Press a key to return to the main menu ...