HP Vectra 500 Series - Manual (Page 140)

6 Aztech AT3300 Audio Fax/Data Modem
European Firmware and Telephone Line Configuration
140 English
4 After installing and localizing the Aztech AT3300 audio fax/data
modem, you must then re-install the Mediatrends Quip software,
since its license requires the card’s identification. For details, see the
Localization Instructions and Replacement Instructions notices
which accompany the replacement card.
NOTE Re-installing the Mediatrends Quip software requires the user password
and a recorded blank message (this is the case, if no previous message
has been recorded).
Using the HyperTerminal Application
By using the HyperTerminal application supplied with Windows 95, you
can manually localize the firmware code for European configurations.
To use the HyperTerminal application:
• Click the Start button, point to Programs, then Accessories, then
select HyperTerminal.
• Double click the Hypertrm.exe icon, and enter the name:
AT3300 test
• Then click OK.
The Phone Number dialog box will then be displayed.
• Enter 11 in the Phone number box.
• Then click OK.
The Connect dialog box will then be displayed. Click cancel. Access to
the HyperTerminal session will then follow, indicating its name
(AT3300 test), as defined earlier.