Cd-rom drive specifications – HP Vectra 500 Series User Manual

Page 25

Advertising
background image

25

1 HP Vectra 500 Series

CD-ROM Drive Specifications

CD-ROM Drive Specifications

WARNING

To avoid electrical shock and harm to your eyes by laser light, do not open the
CD-ROM drive enclosure. Do not attempt to make any adjustment to the CD-
ROM drive. Refer servicing to qualified personnel only. The CD-ROM drive is a
Class 1 laser product.

Data Capacity

•

656 MB (Mode 1)

•

748 MB (Mode 2)

Data Transfer Rate

Depends on the model. The single-speed rate is 150 KB/sec. Therefore, for
example, an 8X model has a data transfer rate of 1200 KB/sec.

Buffer Size

•

≥

128 KB

Average Seek Time

•

< 200 ms (quadruple-speed and faster models)

Rotational Speed

Depends on the model. The single-speed is 200-530 rpm. Therefore, for
example, an 8X model has a rotational speed of 1600-4240 rpm.

Interface

•

ATAPI

Laser

•

Type: Semiconductor Laser GaAlAs

•

Wavelength: 785 nm ± 30 nm

•

Output Power: 3 mW ± 3 mW

•

Pulse Duration: T

≥

3

×

10

−4

sec

Power Requirements

•

5 V, 12 V (see the label on the CD-ROM drive).

Supported CD-ROM Disks

•

CD-ROM XA (Mode 2 Form 1, Mode 2 Form 2)

•

CD-Digital Audio

•

Audio-combined CD-ROM

•

CD-I disks (readable)

•

CD-I Ready disks (readable)

•

CD Bridge disks

•

Photo CD (single and multisession)

Advertising
This manual is related to the following products: