HONDA CT110 - Manual (Page 9)

DRIVE CHAIN
( Refer to the maintenance precaution . )
The service life of the drive chain is dependent upon proper lubrication and adjustment. Poor
maintenance can cause premature wear or damage to the drive chain and sprockets. Under serve
usage, or when the motorcycle is ridden in dusty areas, more frequent maintenance will be necessary.
CLEANING
Clean your motorcycle regularly to protect the surface finishes and inspect for damage, wear and oil
leakage.
CAUTION
High pressure water ( on air ) can damage certain parts of the motorcycle.
Avoid spraying high pressure water ( typical in coin operated car washes ) at the following areas:
Wheel Hubs Ignition Switch
Muffler Outlet Steering Lock
Under Fuel Tank Drive Chain
Carburetor
Instruments
Under Seat
1. 1.After cleaning, rinse the motorcycle thoroughly with plenty of clean water. Strong detergent
residue can corrode alloy parts.
NOTE Clean the plastic parts using a cloth or sponge dampened with a solution of
mild detergent and water.
2. Dry the motorcycle, start the engine, and let it run for several minutes.
3. Lubricate the drive chain immediately after washing and drying the motorcycle
4. Test the brakes before riding the motorcycle in traffic. Several applications may be necessary to
restore normal braking performance.
WARNING Braking performance may be impaired immediately after washing the
motorcycle