HP 3535437 - Manual (Page 13)

v52 Monitor Guide 3–3
Installation
Speaker Installation
Selected monitors come with speakers that must be installed. If you need to install your
speakers, follow these steps:
1. Place the control speaker 1 and the other speaker 2 on either side of your monitor.
2. Attach the speaker power cable 3 to the black connector on the back of the control
speaker 1, and then connect the AC adapter 4 into an electrical wall outlet.
3. Attach the green connector 5 from the control speaker 1 to the green port on the back
of your computer.
4. Turn on the PC, turn on the monitor, and then turn the control speaker power knob
clockwise to turn on the speakers.
1
2
4
3
5