Adjusting advanced settings – HP Version 3.0 User Manual
Page 12
6
HP Webcam User’s Guide
8
Under Flicker, select Outdoor if you’re outside or using all natural lighting. Select 50Hz if you’re outside
North America, or select 60Hz if you’re inside North America.
9
(Optional) Click Save As to store your settings and assign them a name, so you can use them again later.
10
Click OK.
Adjusting Advanced Settings
1
In ArcSoft VideoImpression or HP Photosmart Essential,
click Settings.
2
Click the Advanced tab.
3
Select one of the following settings:
Disable turns off Face Tracking, Manual Zoom,
Mask, and Smooth Background.
Face Tracking sets the camera to follow your face
as you move. See
for more
information.
Manual Zoom enables you to control zoom levels
and directions.
Mask hides the face in the center of the image.
Smooth Background softens edges in the
background behind the central face.
4
(Optional) Select the Wide Screen check box to add a
dark border above and below the image.
5
(Optional) Select the Video Off check box to turn off the
video signal. The screen goes dark when this box is
selected.
6
Click OK.
NOTE: To use previously saved settings, select Load and then select the name you assigned to the settings. To
restore the factory settings, select Default.