Troubleshooting, Technical support, Filter ordering – Hunter Fan HEPATECH 30379 User Manual

Page 7: Warranty

Advertising
background image

7

©2010 Hunter Fan Co.

41773-01 20100609

warranTy

Hunter Fan Company

HEPAtech™™ Air Purification

System

5 YEAR LIMITED WARRANTY

The Hunter Fan Company makes the

following limited warranty to the original

residential user or consumer purchaser of the

HEPAtech™™Air Purification System:

If any part of your HEPAtech™ Air Purification

System (“Air Purifier”) motor fails during the

TeCHnICal SuPPorT

If you have any additional questions or

problems with your Hunter Air Purifier, please

call:

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00

pm Monday - Friday and 8:00 am to 5:00

pm on Saturday, Central Time. You may also

contact us over the Internet at www.hunterfan.

com.

fIlTer orderIng

Depending on usage and the environment,

your Carbon Pre-Filter should be replaced

every three months and your HEPAtech™

filter should be replaced every 6 months.
Replacement filters are available at most

retailers that carry Hunter Air Purifiers. You

may also purchase directly from Hunter Fan

Company by:

Phone: 1-888-830-1326

Website: www.hunterfan.com

* Applicable state and local taxes may apply.

* Prices are subject to change without notice.

* All orders will be shipped USPS or UPS

Ground, allow 12-15 working days for

delivery.

filter#

Type

30931

HEPAtech™

30901

Pre-Filter

TroubleSHooTIng

Problem:

No display or operation.

Solution:

• Confirm that the unit is plugged in.

• Check the installation of the front

grill.

• Reset the air purifier by unplugging

it for 30 seconds.

Problem:

Keypad does not work.

Solution:

• Key pad has been locked to

prevent accidental changes to the

programs.

Problem:

Erratic Display or Operation.

Solution:

• Reset the air purifier by unplugging

it for 30 seconds.

Problem:

Filter and/or Pre-filter Indicator is

Flashing.

Solution:

•The Filter and/or Pre-Filter Life

Counters have reached the

estimated usage times. Check and

replace filters if needed.

Problem:

HEPAtech™ Filter and/or Carbon

Pre-Filter Life Counter is flashing

0%.

Solution:

• The Filter and/or Pre-Filter

Life Counters have greatly

exceeded the estimated usage

times. Check and replace the

corresponding filters.

Problem:

Unit has reduced air flow or

increased noise.

Solution:

• The filter is clogged and should be

changed.

Advertising
This manual is related to the following products: