Huawei ADSL2+Broadband Router Aolynk DR814 - Manual (Page 28)

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
25
& Note:
For DHCP or fixed IP service, the address of the next hop must be entered in the
Gateway box (the box must not be left blank), while Interface can be the default None
or any other value. For other services (i.e. IPoA, PPPoA, PPPoE), either Interface or
Gateway must be specified with a value; if both of them are configured, only Interface
takes effect.
4.7 Security Interface
Click Security in the Main menu and select the Interface tab in the Main Frame to
open the Security Interface Configuration page.
Figure 4-13 Security interface
This page allows you to:
l Enable/disable the security.
l Enable/disable the firewall.
l Enable/disable the intrusion detection.
l Assign the security level.
l Add/delete a security interface.
l Enable/disable NAT to internal interfaces.
l NAT configuration.
To enable/disable the firewall, click the radio button labeled Enabled/Disabled
corresponding to Firewall, then click the button.
To enable/disable the intrusion detection, click the radio button labeled
Enabled/Disabled corresponding to Intrusion Detection, then click the
button.