Huawei ADSL2+Broadband Router Aolynk DR814 - Manual (Page 53)

User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
5 Configuring Your Computers
50
5.1.4 Windows Me PCs
1) In the Windows task bar, click the Start button, point to Settings, and then click
Control Panel.
2) Double-click the Network and Dial-up Connections icon.
3) In the Network and Dial-up Connections window, right-click the Network icon, and
then select Properties. The Network Properties dialog box is displayed with a list of
currently installed network components. If the list includes Internet Protocol
(TCP/IP), then the protocol has already been enabled. Skip to step 11.
4) If Internet Protocol (TCP/IP) is not displayed as an installed component, click
Add ….
5) In the Select Network Component Type dialog box, select Protocol, and then click
Add ….
6) Select Microsoft in the Manufacturers box.
7) Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK.
You may be prompted to install files from your Windows Me installation CD or
other media. Follow the instructions to install the files.
8) If prompted, click OK to restart your computer with the new settings. Next,
configure the PCs to accept IP information assigned by the ADSL router:
9) In the Control Panel, double-click the Network and Dial-up Connections icon.
10) In Network and Dial-up Connections window, right-click the Network icon, and
then select Properties.
11) In the Network Properties dialog box, select TCP/IP, and then click Properties.
12) In the TCP/IP Settings dialog box, click the radio button labeled Server assigned
IP address. Also click the radio button labeled Server assigned name server
address.
13) Click OK twice to confirm and save your changes, and then close the Control
Panel.
5.1.5 Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1) In the Windows task bar, click the Start button, point to Settings, and then click
Control Panel.
2) Double-click the Network icon.
3) The Network dialog box is displayed with a list of currently installed network
components. If the list includes TCP/IP, then the protocol has already been
enabled. Skip to step 9.
4) If TCP/IP is not displayed as an installed component, click Add …The Select
Network Component Type dialog box appears.
5) Select Protocol, and then click Add …. The Select Network Protocol dialog box
appears.