Harbor Freight Tools 96902 - Manual (Page 3)

Page 3 SKU 96902 For technical questions, please call 1-800-444-3353.
Position batteries in proper polarity and do not install batteries of different types,
charge levels, or capacities together.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
sPeciFications
Depth Range 2’ to 240’ (0.6 to 73 m)
Sensor Beam Angle 45°
Frequency 240 KHz
Operating Temperature -4°F ~ 158°F / -20°C ~ 70°C
Battery Requirements Four AAA 1.5V
unPacking
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
oPerating instructions
read the entire iMPortant saFety inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Remove the back cover on the Display and, observing polarity,
insert 4 AAA 1.5V batteries into the unit. Close back cover.
Plug the Transducer (29) into the top of the Display, taking care
to align the pins properly.
Push the
Menu PoWer button to turn the Fish Finder on.
Choose “Start up” to begin using the unit or push the right arrow
button once to see a simulation, push the Menu PoWer button
to select.
SONAR (SOund Navigation And Ranging) works by sending out
a specific audio signal that bounces off objects and is then read
by the unit to provide a graphic display.
12.
13.
1.
2.
3.
4.
5.