Safety instructions, Key to symbols – Husqvarna PG820 User Manual
Page 3
English -
5
Key to symbols
The symbols below are used on the machine and in
this Operator’s Manual. It is important that the user
understands the signifi cance of these in order to work
with the machine safely.
Inspection and/or maintenance should
be carried out with the motor switched
off and the plug disconnected.
Visual check.
Regular cleaning is required.
This product is in accordance with ap-
plicable EC directives.
Please read the operator’s manual
carefully and make sure you under-
stand the instructions before using the
machine.
WARNING! Dust forms when grinding
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor.
Dust forms when grinding, which can
cause injuries if inhaled. Use dust
mask.
Always wear sturdy non-slip boots with
steel toe-caps.
Always wear approved protective
gloves.
•
•
•
•
Key to symbols