Technical data – Husqvarna RS44 User Manual
Page 32
32 –
English
TECHNICAL DATA
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data
RS44
RS52
Engine
Cylinder displacement, cm
3
44,3
50,8
Cylinder bore, mm
42,0
45
Stroke, mm
32
32
Idle speed, rpm
2700
2700
Recommended max. speed, rpm
13500
13500
Speed of output shaft, rpm
10500
10500
Max. engine output, acc. to ISO 8893
2,0/9000
2,4/9600
Catalytic converter muffler
No
No
Ignition system
Manufacturer/type of ignition system
EM/ET
EM/ET
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm
0,5
0,5
Fuel and lubrication system
Manufacturer/type of carburettor
Zama C1Q
Walbro HDA
Fuel tank capacity, litre
0,8
0,75
Weight
Weight without fuel, cutting attachment and guard, kg
8,4
9,1
Noise emissions
(see note 1)
Sound power level, measured dB(A)
112
112
Sound power level, guaranteed L
WA
dB(A)
114
114
Sound levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
100/103
98/104
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.:
2,5/2,7
3,4/4,0
At idle, left/right handles, max.:
3,5/3,5
3,4/4,0
At max. speed, left/right handles, min.:
3,3/3,3
1,4/3,0
At max. speed, left/right handles, max.:
4,8/5,4
5,8/7,4