Husqvarna RS44 - Manual (Page 31)

English – 31
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data GR41 GR50
Engine
Cylinder displacement, cm
3
40,2 48,7
Cylinder bore, mm 40,0 44,0
Stroke, mm 32 32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 13500 13500
Speed of output shaft, rpm 10500 10500
Max. engine output, acc. to ISO 8893 1,8/9000 2,1/9000
Catalytic converter muffler No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, litre 0,8 0,8
Weight
Weight without fuel, cutting attachment and guard, kg 8,6 8,6
Noise emissions
(see note 1)
Sound power level, measured dB(A) 114 115
Sound power level, guaranteed L
WA
dB(A) 114 116
Sound levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
101/104 101/104
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 2,1/2,1 2,7/2,8
At idle, left/right handles, max.: 2,8/2,8 3,7/3,8
At max. speed, left/right handles, min.: 2,4/2,9 1,9/1,9
At max. speed, left/right handles, max.: 3,5/4,0 5,4/4,3