H-P Products TURBINE POWERHEAD and HAND HELD TURBINE POWERHEAD - Manual (Page 7)

OTHER REPAIRS
For repairs or service beyond those described above, please contact your servicing distributor or dealer.
LIMITED WARRANTY
H-P PRODUCTS, INC. warrants that the turbine powerhead and the hand held turbine powerhead, when used
for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workman-
ship for a period of one year from the date of the initial consumer purchase. H-P PRODUCTS, INC. warrants
that the turbine powerhead or the hand held turbine powerhead, when used in a commercial application pur-
suant to Seller’s instructions, will be free from defects in materials and workmanship for a period of ninety (90)
days from the date of the initial consumer purchase. This warranty is limited to the replacement of defective parts
and any costs of shipping shall be incurred by the purchaser. THIS WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AND H-P PRODUCTS, INC.
SPECIFICALLY DISCLAIMS RESPONSIBILITY FOR CONSEQUENTIAL AND INCIDENTAL DAMAGES, AND
LIMITS THE IMPLIED WARRANTY OF MERCHANTABILITY TO THE PERIOD OF EFFECTIVENESS OF THIS
EXPRESS WARRANTY.
H-P PRODUCTS, INC.,
Louisville, Ohio
44641 U.S.A.
(216) 875-5556
TROUBLE SHOOTING TURBINE
POWERHEADS
CAUTION
Moving parts – disconnect from vacuum system before servicing unit
PROBLEMS
1. TURBINE RUNS SLOW 3. BRUSH BOUNCES IN USE
2. BRUSH MAKES KNOCKING NOISE 4. BRUSH HARD TO PUSH
POWERHEAD INSTRUCTION MANUAL
FLOOR HAND
BRUSH BRUSH
1. CHECK BOTTOM PLATE PAGE/PAR. 3/(E) 3/(C)(D)
2. CHECK BELT AND TENSION PAGE/PAR. 3/(E) 3/(E)
3. CHECK BEATER BRUSH PAGE/PAR. 3/(E) 4/(F)
4. CHECK ALL INTAKE AREAS PAGE/PAR. 2/(C) 3/(D)
FOR OBSTRUCTIONS AND BRUSH
ROTATION DIRECTION
CENTRAL VACUUM CLEANER SYSTEMS
NON-BAG MODEL BAG MODEL
1. CHECK DIRT RECEPTACLE 1. CHECK PAPER BAG
2. CHECK GUARD SCREEN 2. CHECK CLOTH BAG
3. CHECK ALL FILTER SCREENS 3. CHECK AIR FILTERS
4. CHECK HOSES FOR AIR LEAKS 4. CHECK HOSES FOR AIR
OR OBSTRUCTIONS LEAKS OR OBSTRUCTIONS
READ OPERATION MANUAL PROCEDURES
Page 7