CITIZEN SR-281N - Manual (Page 33)

File name : CBM_SR-281N_IB_English_black_v09330.doc
Date: 2009/3/30 Trimmed Size : 140 x 75 mm SCALE 1 : 1
-E32-
(A) In 1–VAR mode, the method to view data depends on whether you
want to view data item or not.
# Each time you press [ DATA ], first data item appears 1 second
and then the corresponding value.
[ DATA ]
DEG
dAtA 1
STAT
EDIT 1 second
DEG
15.
STAT
EDIT
# Each time you press [=], value appears directly on the display
without data item.
[=]
DEG
15.
STAT
EDIT
(B) In REG mode, each time you press [ DATA ], data item and x value
appear on the screen at the same time. You can press [ ] to
switch between x and y value.
[ DATA ]
DEG
DATA 1 = 15 , 45
STAT
15
EDIT [ ]
DEG
DATA 1 = 15 , 45
STAT
451
EDIT
If you want to correct data, find out and enter a new entry to replace it.
FULL message
A “ FULL” is indicated when any of the following conditions occur and
further data entry becomes impossible. Just pressing any key can
clear the indicator. The previous data entries are still retained unless
you exit STAT mode.
1) If the times of data entry by [ DATA ] is more than 50
2) The number of repeats is more than 255
3) n >12750 (n = 12750 appears when the times of data entry by
[ DATA ] are up to 50 and the number of repeats for each value
are all 255, i.e. 12750 = 50 x 255 )
Complex Calculations
Use CPLX ( [ MODE ] 3 ( CPLX ) ) mode for complex calculations.
Complex mode enables you to add, subtract, multiply, and divide
complex numbers.
The results of a complex operation are displayed as follow :
Re Real value Im Imaginary value
ab Absolute value ar Argument value