Harbor Freight Tools 93341 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 93341
Specifications
Pre-drilled holes 7/16” 360º
Weight Capacity 100 lb.
IMPORTANT SAFETY INFORMATION
Installation Precautions
1. Install only according to these instructions.
Improper installation can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
3. Keep installation area clean and well lit.
4. Keep bystanders out of the area during installation.
5. Do not install when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely installed product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
5. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6. Use the right product for the job. There are
certain applications for which the Trailer Spare
Tire Carrier was designed. Do not modify the
Spare Tire Carrier and do not use this product
for a purpose for which it was not intended.
7. Replacement parts and accessories. When
servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
8. The tire (not included) attached to
this Carrier should be locked in place
with nuts tightened to 90 ft. lb.
9. Make certain that no persons or pets are under
the Trailer Carrier or Trailer during loading.
10. The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
11. Read and understand all instructions and safety
precautions as outlined in the manufacturer’s
manual for the trailer you are using. Make
sure to mount the Trailer Carrier to the
manufacturer’s recommended mounting points.
12. It is the trailer owner’s responsibility to make sure
the usage of this product meets all local motor
vehicle laws and regulations. Do not obscure
marker, tail or running lights or license plate.
13. Make certain bracket and tire do not
interfere with the trailer’s normal
movement or blocks the driver’s view.