Hawking Technology HWC54D - Manual (Page 21)

Parameter Description
Wireless Mode 802.11 B/G mix – If you have a mix of 802.11b and 802.11g
wireless stations in your network, it is recommended to setting the
card to this mode. This mode is also the default setting.
802.11 B only – This card can be compatible with both 802.11g
and 802.11b wireless stations. If there are only 802.11b wireless
stations in the network, you can set the card to this mode.
Tx BURST Tx Burst enables the card to deliver the better throughput in the
same period and environment.
B/G Protection If you have a mix of 802.11b and 802.11g wireless stations in the
network, it is recommended that you enable the protection
mechanism. This mechanism can decrease the rate of data
collisions between 802.11b and 802.11g wireless stations. When
the protection mode is enabled, the throughput of the card will be
a little lower due to more complex data packets that must be
transmitted.
Auto – Based on the status of the network and automatically
disable/enable protection mode.
On – Always enable the protection mode.
Off – Always disable the protection mode.
Parameter Description
ADHOC_OFDM When the network type is in Ad Hoc mode, that the card can only
work in 11b data rate. It is defined by Wi-Fi organization. If you
want to enable the data rate up to 54Mbps (11g), select
18