Installation instructions, Turn the water on at the shutoff valve, Connect the tubing to the refrigerator – Hotpoint 22 User Manual

Page 19

Advertising
background image

Installation Instructions

Tighten any connections that leak.

TURN THE WATER ON AT THE
SHUTOFF VALVE

10

Place the compression nut and ferrule (sleeve)

onto the end of the tubing as shown. On a GE

SmartConnect Refrigerator Tubing kit, the nuts

are already assembled to the tubing.

On models using the refrigeration connection at

the water valve, remove the plastic flexible cap.

NOTES:

Before making the connection to the refrigerator,

be sure the refrigerator power cord is not plugged

into the wall outlet.

If your refrigerator does not have a water filter, we

recommend installing one if your water supply

has sand or particles that could clog the screen of

the refrigerator’s water valve. Install it in the water

line near the refrigerator. If using a GE

SmartConnect™ Refrigerator Tubing kit, you

will need an additional tube (WX08X10002)

to connect the filter. Do not cut plastic tube

to install filter.

CONNECT THE TUBING TO THE
REFRIGERATOR

9

CONNECT THE TUBING TO THE
REFRIGERATOR

(CONT.)

9

Some models have the refrigerator connection at

the end of tubing located outside the compressor

compartment access cover. On other models, the

compressor compartment access cover must be

removed in order to access the refrigerator

connection at the water valve.

Reattach the access cover.

Insert the end of the tubing into the refrigerator

connection as far as possible. While holding the

tubing, tighten the fitting.
For plastic tubing from a GE SmartConnect

Refrigerator Tubing kit, insert the molded end of

the tubing into the refrigerator connection and

tighten the compression nut until it is hand tight,

then tighten one additional turn with a wrench.

Overtightening may cause leaks.
Fasten the tubing into the clamp provided as

shown to keep it in position. You may need to pry

open the clamp.

One of the illustrations below will look like the
connection on your refrigerator.

1/4

Compression
Nut

Tubing
Clamp

1/4

Tubing

Refrigerator
Connection

SmartConnect™
Tubing

Ferrule
(sleeve)

Tubing
Clamp

Refrigerator
Connection

SmartConnect™
Tubing

1/4

Compression
Nut

Ferrule
(sleeve)

1/4

Tubing

19

Advertising
This manual is related to the following products: