Honeywell 7300 - Manual (Page 3)

WIRELESS COMMUNICATION CARD FOR TB7200/7300/7600 SERIES COMMUNICATING THERMOSTATS
3 62-2020—03
STATUS LED INDICATORS
See the table below for status indicators on the wireless communication card.
Table 1. Status LED Indicators
SPECIFICATIONS
Thermostat Compatibility: TB7200, TB7300, and TB7600 Series wireless thermostats
Network Protocol: ZigBee wireless mesh
WEBs-AX Controllers: Compatible with WEB-2xx, WEB-6xx, and WEB-7xx
Platform:
WEB-2xx and WEB-6xx - WEBStation-AX 3.0 or later
WEB-7xx - WEBStation-AX 3.5 or later
Number of Thermostats Supported:
WEB-2xx - up to 30 wireless thermostats
WEB-6xx & WEB-7xx - up to 50 wireless thermostats
NOTE: The maximum number of thermostats supported by a WEBs-AX controller is dependent on resources
available at the controller.
Connections: 2 x 15 gold plated header for serial connection to compatible WEBs-AX controller and SMA connector
for antenna.
Input: Reset button
Status LED: 1 green LED
Board Dimensions: 2.2 in. x 1.75 in. (excluding antenna)
Approximate Shipping Weight: .02 lb
Agency Approvals: Compliant with FFC Part 15, Subpart C; C-Tick: EN55022:2006, IEC 61326-1:2005
Indicator Description
1 x 200ms short blink Power on
2 x 200ms short blinks Power on and card memory initialized properly
3 x 200ms short blinks Power on, card memory initialized properly and serial communication with WEBs-AX
controller main board active
4 x 200ms short blinks Power on, card memory initialized properly, serial communication with WEBs-AX
controller main board active and wireless networks started successfully
4 x 200ms short blinks and
1 x 1500ms long blink
Power on, card memory initialized properly, serial communication with WEBs-AX
controller main board active, wireless networks started successfully and wireless
communication with wireless thermostats active