Hyundai EXCELLENCE H-CMD2002 - Manual (Page 66)

66
Rear view video camera
This playing source is available only if the rear view video camera is installed properly. Reverse driving
activates CAMERA playing mode. Connect the video input cable "CAMERA" with the camera output cable for
this function.
1. Press the SYS SETUP button on the RC to enter the System setup menu.
2. Touch the General setup item or press the
button on the RC1 to select the General setup menu, press
the PLAY/PAUSE button to enter it.
3. Touch the Parking item or press the button on the RC1 to select this item.
4. Touch ON or OFF or press the button on the RC1 to select the setting.
On (if the rear view video camera is connected, when reverse driving, the monitor automatically
switch to CAMERA source. When the reverse driving is done, the monitor switch back to its original
content or status);
Off (if the rear view camera is connected, when reverse driving, the monitor will stay in current mode).
5. Touch the BACK button in the top right corner of the screen to return to previous menu or press the
button on the RC1 until select the BACK button, then press the PLAY/PAUSE button to return to previous
menu.
Navigation function
This unit can be connected with suitable navigation system – H-NVB5000 model.
Connection steps:
1. Insert SD card into H-NVB5000’s SD card slot;
2. Connect GPS antenna with navigation box H-NVB5000;
3. Connect SMART commutator with navigation box H-NVB5000;
4. Connect R/G/B/SYNC/AV-A output jacks in the SMART commutator with corresponding jacks in the