Hustler Turf XR-7 - Manual (Page 2)

Stainless-steel high-pressure lines
with Parker Seal-Lok™ O-Ring Face
Seal Fittings — hydraulic hoses &
fittings are guaranteed for a lifetime
to never leak!
Spring-assisted, foot-
operated deck lift
for easy adjustment
of cutting height or
for quick adaptation
to curb hopping and
trailering
BEAUTY, MORE THAN SKIN DEEP...
BE STRONG. BE SIMPLE. BE SERVICEABLE.
Hustler Zs and Super Zs have already built a reputation for the easiest maintenance in the
industry: fast, clean, and simple. With no daily lube points and fast, easy accessibility to all
maintenance areas, the Hustler Z keeps you on the job, out of the shop, in the money.
• Maintenance-free sealed bearings on the front-caster-wheel forks and
the biggest ball joints in the industry, bar none
• Hinged foot and seat pans for easy service access
• Single-belt drive for reduced maintenance (compare with dual-belt drive
on most competitive models.)
• Engine service points located at the rear of the machine - oil filter and
drain can be serviced with a single pan, with no danger of fluids spilling on belts
• Sealed bearings on the spindle shaft – lubrication required only once a year
• Simplicity rules! Raise the seat pan and deck pan and marvel at the lack of “stuff”!
Customizable rear bumper
Optional 9-bushel BAC-VAC™ catcher
Heavy-duty, remote air cleaner – standard equipment
More engine options including liquid-cooled and EFI
Fuel tanks with site gauge
Wider, angled fuel neck for easier filling
Increased fuel capacity to 14.4 gallons
Digital hour meter
Separate choke lever with stainless steel cables for smoother operation
Rear-discharge decks with patent-applied-for counter-rotating blade design
Higher-torque electric clutch
Faster reverse speed
Improved, more reliable electrical system
More durable wheel motors – as much as 3 times the life
State-of-the-art powder-coat paint for the best finish in the industry
Larger-diameter deck-height pin for increased durability
Improved pump belt life
Easier-to-service spindle bearings – three year warranty
Improved design of deck-lift foot pedal for easier access to deck
Stainless-steel throttle and choke cables for smoother operation
Spend less time servicing, fewer grease points
Mulch-kit design (patent applied for) that is the easiest to install in the industry
Longer-life idler springs
Optional rear anti-scalp wheels
Easier blade servicing
Serviceless deck idler
Improved bearings in deck and pump idlers
Molded-rubber discharge chute – tough, yet gentle on objects
More durable deck cover knobs
XR-7™ mowing decks! – mow anywhere, everytime! – for superior quality of cut,
unmatched versatility, awesome distribution — all this and the option of a striping roller
Optional FlexFork ™ – shock-absorbing front caster forks (not shown)
Fusion™ blades for less sharpening
Light-colored seat to keep your seat cooler
Height-adjustable steering levers for increased comfort
Optional suspension system for standard seat
New! Optional FlexSeat ™, like a rocking chair for your Hustler!
Seat pan has been raised for improved operator comfort
More comfortable, bigger grips on steering levers
Optional hydraulic deck lift
60”, 72” and 54” and 66” decks
Air containment kit
SmoothTrak™ steering – the smoothest,
most responsive steering on the market!
Patented, built-in automatic park brake system
Improved caster fork – dampened to
reduce wobble
Improved caster bearings –
three year warranty
Internal gusset for incedible strength
Blade design for better cut and
“Wavy” mulching blades for
improved performance
Increased leg room
Up top, the Super Z looks sharp and is a picture of ingenuity. It’s
incredible simplicity, durability, and patent-applied-for innovations
make this the finest mower ever put into the grass.
Compare the Hustler’s construction to the competitor’s. Hustler has
put more steel in all the right places. And we stand behind it with a
lifetime warranty on the tractor frame and the leading edge of the
deck – the part of the deck that takes the most abuse. Spindle-mount
areas are nearly 1/2-inches thick!
Versatility? The XR-7 deck will mow in any condition, any time of day
and provide the finest finished appearance every time! These decks
are configurable for different mowing conditions – fine cut, rough cut,
mulch, catch, even Bahaiagrass is no match for the XR-7 deck.
When the Hustler Z was introduced and then the Super Z shortly
thereafter, they started a mini revolution in the lawn care industry.
Now, the Hustler Zs have been re-engineered to be even better with
many refinements and improvements.
All the Hustler hallmarks are still here, though.
• Best warranty in the business including:
• Lifetime warranty on the tractor frame
• Lifetime warranty on the leading edge of the deck
• A full 2-year, bumper-to-bumper warranty – parts and labor!
• Hydraulic hoses and fittings are guaranteed to never leak
• 3-years on blade-spindle bearings and front-caster-fork bearings
• SmoothTrak™ steering for the most nimble yet smooth steering
on a z-rider
• Patented automatic park-brake system built into the steering levers
• Foot-operated deck-lift system is much easier to use than
hand-operated systems
The Hustler frame is one piece from
front casters to rear bumper, not bolted
together like competitors’.
Internal gussets at frame
bends for incredible strength.
Lifetime warranty!
Optional adjustable striping
roller mounts to rear of deck.
Flex Forks™ deliver greater operator comfort
because bumps are smoothed out. They smooth
out the ride producing a more even cut especially
over uneven terrain. This allows for greater
operator comfort at higher speeds. Mow faster,
get done sooner.
Flex Seats™ “like a rocking chair
for your mower”deliver greater
operator comfort preventing “back-slap”
caused by a rigid seat over uneven
terrain. This allows for greater
operator comfort at higher speeds.
Mow faster, get done sooner.
A certified 2-post, foldable
ROPS (Roll Over Protective
Structure) is available for the
Hustler Z and Super Z.