Honeywell CT3650 - Manual (Page 16)

69-1285—2 16
Copy a Day
Your thermostat can copy program settings from one day to another.
❑ Press , , or to enter programming mode.
❑ Press until the display shows the day you want to copy.
❑ Press . The display shows.
❑ Press until the display shows the day you want to copy to.
❑ Press to accept the change.
❑ Repeat these steps for each day you want to copy.
NOTE: donE appears for two seconds and then the normal program display appears.
Clear a Program Period
NOTE: Wake cannot be cleared.
❑ Press , , or for the program period you want to clear.
❑ Press until the desired day displays.
❑ Press and hold the , , or for approximately 3 seconds until the time and temperature clear.
❑ Repeat the above steps for each period to be cleared.
❑ Press .
Wake Leave Return Sleep
Day
M13327
Mon
Copy
M13328
Mon Wed
Day
M13329
Copy
Leave Return Sleep
Day
Leave Return Sleep
Run
Program