Homelite BACKPACKER II UT08572 - Manual (Page 7)

6 7
KNOW YOUR BLOWER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBES
The blower tubes can be assembled and installed on the
blower using no tools.
MOTOR
The blower has a powerful 30cc engine with sufficient power
to handle tough blowing jobs.
FEATURES
THROTTLE TRIGGER
The blower can be operated at any speed between idle and
full throttle.
TRIGGER LOCK
The trigger lock feature is used for easier starting and also
allows the user to operate the blower without holding the
throttle trigger. To disengage the trigger lock, simply depress
the throttle trigger.
WIDE SWEEPER NOZZLE
The wide sweeper nozzle allows for more area to be covered
during blower operation.
UNPACKING
This product requires assembly.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Blower
Elbow
Bellows
Upper Tube
Large Clamps (2)
Small Clamp
Cable Tie
Straight Tubes (2)
Nozzle
Harness Straps (2)
2-Cycle Engine Oil
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
NOTE: Read and remove all hang tags and store with your
Operator’s Manual.