Harbor Freight Tools 02471 User Manual
Page 4
Page 4
SKU 02471
23. Read labels on cleaning solvents and paint coatings. Chlorinated solvents such
as 111-Trichloroethane and Methylene Chloride (also known as methyl-chloride) can
chemically react with aluminum and may explode. Many paint sprayers contain
aluminum. Contact solvent manufacturer or paint supplier if your are in doubt.
24.
Paints and solvents may be harmful or fatal if swallowed or inhaled. Always use a
respirator that is appropriate for type of paint/solvent being used when spraying. Avoid
prolonged skin contact with solvents or paints as they will irritate skin. After contact,
immediately wash off exposed area with hot, soapy water.
25. Check all Spray Gun Seals and Air Connection. Before use, make sure the
Cup (#17) is fully tightened to the Body (#3). Make sure the air hose is securely
fastened to the Air Inlet (#13).
26. Read and understand all warnings and instructions provided in the instruction manual
of the air compressor being used.
27. Never point Paint/Texture Air Gun at people or animals.
Note: Performance of the compressor (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator. Additionally, read all of the warnings
and instructions provided in the instruction manual of the air compressor you will be
using.
WARNING: This product contains or, when used, produces a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code 25249.5,
et seq.
)
Unpacking
When unpacking, check to make sure the parts listed on page 8 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.