Hitachi VM7500LA - Manual (Page 46)

AUDIO AND VIDEO DUBBING (only for VM-8500LA) - 46 -
3. Play the tape and press "REC/PAUSE" where you want to dub audio.
• The camcorder enters the still play mode.
4. Press "DUBBING AUDIO/VIDEO" and "PLAY" at the same time.
• "A.DUB II" appears in the viewfinder or on the LCD monitor.
NOTE: If "DUBBING AUDIO/VIDEO" and "PLAY" are pressed twice, audio and video dubbing will start. In this
case, press "STOP/EJECT" to release the dubbing mode.
5. Press "REC/PAUSE" to start audio dubbing.
6. Press "STOP/EJECT" to stop audio dubbing.
NOTE: If "DISPLAY" is pressed so the display appears in the viewfinder or on the LCD monitor, the tape stops
automatically at the reading of "0000M" and audio dubbing stops.
AUDIO AND VIDEO DUBBING (only for VM-8500LA)
The audio and video dubbing feature lets you record new audio (sound) and video (pictures) simultaneously on
a previously recorded tape.
When you audio and video dub a tape, the previous audio and video are erased and replaced with the new
sound and pictures. The replacement audio and video can be the sound and picture taken by the camera or
from a video source connected to "AUDIO" and "VIDEO" on the camcorder.
NOTE: When dubbing the sound and picture from a video source, set "AV OUT/IN" to the "IN" position.
When dubbing the sound and picture from the camera, set "AV OUT/IN" to "OUT" and do not connect
"AUDIO" and "VIDEO" jacks.