Hunter Fan 30715 - Manual (Page 12)

41792-01 12
Air Purifier Maintenance
3. Gently pull on the filter to remove it from the unit. While removing the filter,
note the directional arrows printed on the top of the filter. The new filter will be
installed with the same orientation. Refer to Fig. 12. Once removed, the used
filter can be discarded.
4. Remove the new filter from its wrapping and look at the directional arrows
printed on the side of the filter. Install the filter with arrows pointing towards
the unit. Refer to Fig. 12. Press the filter firmly into the air purifier. To avoid
damaging the filter media, you should press on the frame of the filter only.
5. Place the front grill back onto the unit. First, line up the tab on the bottom of
the grill with the recess on the purifier base and then push the top of the grill
forward until it is closed. Refer to Figs. 6 and 7, pg. 7. NOTE: This unit will
not operate unless the grill is in the correct position.
6. Plug in the unit.
7. To reset the filter counter, press the FILTER RESET key for 2 seconds. The Filter
Counter will return to 100% and the Filter indicator will stop flashing.
Fig. 12
FILTER
41792-01_rev 08.02.05.pmd 8/2/05, 4:24 PM 12