HP PROCURVE 2610 - Manual (Page 21)

1-11
Introducing the Switch
Back of the Switch
In
tr
o
d
u
c
in
g
th
e
Sw
itc
h
Console Port
This port is used to connect a console to a 2610 Switches by using the
RJ-45 to DB9 cable, supplied with the switch. This connection is described
under
“8. (Optional) Connect a Console to the Switch” on page 26 in chapter
2, “Installing the Switch.” The console can be a PC or workstation running a
VT-100 terminal emulator, or a VT-100 terminal.
Back of the Switch
Figure 1-3. ProCurve Switch 2610-24 and 2610-48 non-PWR
Figure 1-4. ProCurve Switch 2610-24-PWR and 2610-48-PWR
Figure 1-5. ProCurve Switch 2610-24/12PWR
AC power connector RPS Input
AC power connector RPS Input EPS Input
EPS Input
AC power
connector RPS Input