Hunter Fan QUIET FLO PLUS 30785 - Manual (Page 12)

42937-01 12
RIDGE
Fig. 11
5. Place the bottom of the filter rim behind the ridges on each side of the
bottom of the unit. Refer to Fig. 11.
6. Lift the Filter Tab and press the top of the filter into the Air Purifier. To
avoid damaging the filter, you should press only on the filter’s frame.
When the new filter is in place, release the Filter Tab.
7. Place the front grill back onto the unit. Refer to Figs. 7, pg. 7. NOTE:
This unit will not operate unless the grill is in the correct position.
8. Plug the unit in and continue operating it normally.
9. To reset the QuietFlo ®
Main Filter Life Counter to zero, press and hold
the QuietFlo
®
Main Filter Life Counter Reset Key for three seconds.
When the display shows 100%, release the Key. The Counter is now
reset.
Obtaining Replacement Filters
To obtain replacement filters for your Air Purifier, first determine your model number
by looking at the information label on the bottom of the Air Purifier. The model num-
ber will be listed on the label. Then, call 1-800-4HUNTER for your nearest retailer
or Hunter Customer Service at 1-800-313-3326 (CAN 1-888-855-8300) to order
directly. To order online, visit our Website at www.hunterfan.com. To ensure that
you obtain the correct filters, please find your model number below that specifies
the correct replacement filters.
Hunter Air Purifier Model No.: 37785
Carbon Odor Filter Replacement Model No.: 30901
HEPAtech ®
Filter Replacement Model No.: 30943