Set up a bluetooth connection – HP PHOTOSMART PLUS B209 User Manual
Page 13
NOTE:
If your computer is configured to connect to a series of network drives, make
sure that your computer is currently connected to these drives before installing the
software. Otherwise, the HP Photosmart software installer might try to use one of the
reserved drive letters and you will not be able to access that network drive on your
computer.
NOTE:
Installation time can range from 20 to 45 minutes depending on your
operating system, the amount of available space, and the processor speed of your
computer.
To install the Windows HP Photosmart Software on a networked computer
1.
Quit all applications running on your computer.
2.
Insert the Windows CD that came with the product into the CD-ROM drive on your
computer and follow the onscreen instructions.
NOTE:
If the HP Photosmart is not connected to a network, when prompted,
connect the product to the computer using the USB setup cable included in the
box. The product will then attempt to connect to the network.
3.
If a dialog box about firewalls appears, follow the instructions. If you see firewall pop-
up messages, you must always accept or allow the pop-up messages.
4.
On the Connection Type screen, select an appropriate option, and then click Next.
The Searching screen appears as the Setup program searches for the product on
the network.
5.
On the Printer Found screen, verify that the printer description is correct.
If more than one printer is found on the network, the Printers Found screen appears.
Select the product you want to connect.
6.
Follow the prompts to install the software.
When you have finished installing the software, the product is ready for use.
7.
To test your network connection, go to your computer and print a self-test report to
the product.
Set up a Bluetooth connection
If you insert an HP Bluetooth Adapter (such as the HP bt500) into the front USB port, you
can print to the HP Photosmart from Bluetooth devices such as PDAs, camera phones,
and computers.
This section contains the following topics:
•
“What you need for a Bluetooth connection” on page 10
•
“Connect the HP Photosmart to a computer using a Bluetooth® wireless
connection” on page 11
•
What you need for a Bluetooth connection
To connect the HP Photosmart with a Bluetooth connection, you will need the following:
Chapter 2
10
Finish setting up the HP Photosmart
Finish
set
ting u
p
th
e HP Photo
sma
rt