Т³гж 8, П ´ з ° ч, Preparation before washing – haier AWT-80LI User Manual

Page 8: Do s and don ts, Usage of the detergent

Advertising
background image

П ´ З ° Ч ¼ ± ¸

Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose .

4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.

Preparation before washing

Pay attention to following before washing the laundries

Check if
the laundries
has special
requirement
on washing

Clear the
pocket. Take
out the coins,
sand, hairpins
etc.

Tie the long
strips; fasten
the buttons;
close zippers.

When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons into
other laundries.

The quantity of
the laundries
shall not be too
large. Stretch
and loosen the
laundries before
putting them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like
mud or dust. For the parts with heavy soil, please apply detergent on
them in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn
it over before putting in.
f. Do not put those laundries polluted by chemicals into the washing
machine directly.

6

Ï ´ µ У О п µ Д ² О ¿ ¼ Ц Ш Б ¿

П ´ µ У Р л Ц ª

Ï ´ µ У ¼ Б µ Д К ¹ У Г

The capacity of washing and spinning of the
machine refer to the weight of the
standard laundries under dry condition that can
be washed or spinned in one time.
the largest capacity is only the loading capacity
of the drum

The thickness ,size , type of the cloth will influ-
ence the actual washing capacity. It is suit-
able to put in reasonable amount of laundries
and the laundries can be turned round in wash-
ing for one time washing.

Do not select " Maximum " water level for
laundries less than 1.5kg, so as to avoid
splashing of water.

Do s and Don ts

How to use the whitener

Fill water to decided level. Dilute
the whitener with container.
Pour it slowly into the washing tub.

Avoid using whitener on laun-
dries with color or pattern as they
are prone to lose color.

The whitener shall not touch
the laundries directly.

Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30
seconds to dissolve it completely.
3.Put in laundries. Select suitable
water level.

The instant dissolving of the washing
powder:
1.Prepare warm water of 30 C and a
container.
2.Add the powder while stirring to fully
dissolve it.

The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
Dosage of different washing powder is

different. Please refer to the instruction
of the washing powder for the detail
dosage.

Refer to the user's manual for
the usage and quantity of the
whitener.

For powder whitener, please
dissolve it before using.

It is suggested not to use high sudsing detergent.

How to use the washing powder

Usage of the detergent

7

Advertising