Freedom9 USB - Manual (Page 14)

freeStor Mini 210/310 User’s Manual
11
shut down all programs and choose to reboot the computer. After your computer reboots, go
to step 12.
11. If you are not asked to reboot, you can select to view the README file and/or launch
freeStor SBC immediately (Figure 19). Click “Finish” to close the installation wizard.
Figure 19: Installation Completed
12. To start freeStor SBC from Windows, click on the Start Menu, then Programs, then freedom9
freeStor SBC folder, then the freedom9 freeStor SBC icon (Figure 20).
Figure 20: Starting freeStor SBC
3.2 Performing an Initial Backup
Before you can use the one-touch backup button, you have to perform a full backup first. These
steps will quickly guide you through your first full backup. For more detailed information
regarding using the software, see Section 4.
Note: Active databases should be stopped before performing a backup,
otherwise the copied version of the database may be corrupted by changes to
the database during the backup.
1. Start freeStor SBC.