Falcon SVR2K-2T - Manual (Page 8)

OM48021-1 Rev. C
8
DIP SWITCH SETTINGS
(All SVR 1kVA – 3kVA Models)
FOR 100-120Vac NOMINAL LINE VOLTAGE
SW2 SW1 VOLTAGE
Down Down 100V
Down Up 110V
Up Down 120V
Up Up 115V
FOR 220-240Vac NOMINAL LINE VOLTAGE
SW2 SW1 VOLTAGE
Down Down 220V
Down Up 230V
Up Down 240V
Up Up 200V
SW3 – DISABLED
Up GREEN MODE OFF (Default)
NOTE: THE SVR MUST BE TURNED OFF AND BACK ON BEFORE NEW DIP SWITCH SETTINGS WILL BECOME
ACTIVE.
WARNING – REFER THE SERVICING OF THIS EQUIPMENT TO QUALIFIED SERVICE PERSONNEL ONLY.
WARNING – NEVER SERVICE THIS UNIT WHILE THE POWER IS APPLIED; HIGH VOLTAGE EXISTS AND A
HAZARD OF ELECTRICAL SHOCK IS PRESENT.
WARNING – THIS DEVICE IS INTENDED FOR ADMINISTRATION AND LAB USE. NOT INTENDED FOR LIFE
SUPPORT APPLICATIONS.
DIP
SWITCHES
SELECTION
TABLE
REAR PANEL VIEW
ON = 1
OFF = 0