Instrumentation – FORD 1999 Crown Victoria User Manual

Page 18

Advertising
background image

1. Push either the right or left side of the SELECT control to choose the
desired function.

2. Press the RESET control and the
selected message center function
will be reset to zero.

Message center functions

DIST TO EMPTY (DTE)

This function estimates
approximately how far you can drive
with the fuel remaining in your tank
under normal driving conditions.
Remember to turn the ignition OFF when refueling your vehicle.
Otherwise, the display will not show the addition of fuel for a few miles.
At least 9.5 liters (2.5 gallons) of fuel must be added for the fuel gauge
to immediately show the new fuel level.

The DTE function will flash for 5 seconds and sound a tone for 1 second
when you have approximately:
• 80 km (50 miles) left before you run out of fuel
• 40 km (25 miles)
• 16 km (10 miles)
The message center will remain in
the DTE function until the SELECT
control is pressed to change
functions.

Displayed DTE will not be equal to
AVG ECON multiplied by the FUEL
REMAIN value. DTE is calculated
using a method that considers the
fuel economy of the last 800 km
(500 miles) driven.

RESET

E/M

SELECT

DIST TO

EMPTY

TRIP

A

AVG

ECON

TRIP

B

AVG

SPEED

RESET

E/M

SELECT

Instrumentation

18

Advertising