Port replicator connector – FUJITSU LIFEBOOK U810 User Manual
Page 83
83 - Device Ports
Connecting directly to the internal LAN
1
If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 36). Align the cable connector with the port replicator connector
and push the connector into the port until it is seated.
2
Align the LAN connector with the port opening.
3
Push the connector into the port until it is seated.
4
Plug the other end of the cable into a LAN outlet.
Connecting to the internal LAN via optional Port Replicator
1
Align the LAN connector with the port opening on the rear of the port replicator (Figure 37).
2
Push the connector into the port until it is seated.
3
Plug the other end of the cable into a LAN outlet.
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator or
for connection of the external video/LAN adapter cable. In order to connect your notebook to this device,
follow the instructions that came with your port replicator.