Next event number setting [next event no – Fostex PD606 User Manual
Page 143
143
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
The “Next event No” menu item sets the event number in the description information of an
audio file. The event number is recorded to each file as “fEVENT” information in the BWF BEXT
Chunk Description. The setting is stored in the System ROM of the unit.
Next event number setting [Next event No]
4)
Use the [MENU] dial to enter the desired number and press the [ENTER/YES] key to confirm
your setting.
You can set the “Next event No” to a desired number between “00001” and “99999”.
Options
<Note>:
The edited value is reflected to newly recorded audio file. It does not affect
the current audio file. If the event number exceeds 99999, the number returns to
00000.
3)
Use the [MENU] dial to select the “Next event No” menu item and press the [ENTER/YES]
key.
The current setting starts flashing and you can now select the desired option.
1)
While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2)
While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing