Farallon Communications 5750 - Manual (Page 19)

1
1-5 Using the Control Panel
Functions menu
You can choose the following commands from this menu:
Choose: To do this:
Print Pages Print special pages from the DocuColor. You can print the
following pages from the submenu that appears:
Test Page —A test page enables you to confirm that the
DocuColor is properly connected to the copier and
provides color and grayscale samples to troubleshoot
problems with the copier or the DocuColor. The
following information is listed: Server Name, Printer
Model, and Date and Time printed.
Configuration —Prints the Configuration page, which
gives the current server and device configuration. This
page lists general information about the hardware and
software configuration of the DocuColor, the current
options for all Setup settings, and the ethernet and token
ring addresses (if applicable) of the DocuColor.
Job Log —Prints a log of the last 55 jobs. For information
on the fields in the Job Log and on printing it in other
forms, see “Using the Job Log” on page 5-9.
Control Panel Map— Prints the Control Panel map, which
is an overview of the screens you can access from the
Control Panel. For information about using these screens
to set up the DocuColor, see the
Administrator Guide .
Font List —Prints a list of all fonts resident on the hard
disk.
Suspend Printing Suspend communication between the DocuColor and the
copier. You can suspend printing if you want to interrupt
the current DocuColor job so that you can use the copier
to make copies. Jobs continue to process on the
DocuColor and after you make the copies, you can select
Resume Printing and the copier will continue printing
jobs.