FujiFilm PICTOGRAPHY 3500 - Manual (Page 28)

3. INSTALLATION
26
The [Shared Printer] field displays the names of the computers
connected to the network. Double-click the name of the server
to which the PICTROGRAPHY 3500 is connected. Select a
share name for the printer.
This selection sets the network path in the [Printer] field.
After confirming that the network path has been set in the
[Printer] field, click the [Next] button.
7. The following screen is displayed.
8. Select [Yes] or [No], and then click the [Next] button.
The following screen is displayed.
9. Click the [Finish] button.
If installation of the printer driver finishes without problems,
the icon for the new printer appears in the
[Printers] folder win-
dow.
10. Restart the computer.
This completes the installation of the printer driver.
3.4.3. Uninstall
The printer driver uninstall procedure is described below.
1. Start by deleting the printer.
Click to select
[Setting] > [Printer] from the [Start] menu.
The [Printers] folder window is displayed.
2. Click the [FUJIFILM PICTROGRAPHY3500] icon, and then
click [Delete] from the [File] menu.
You will be prompted to confirm the deletion. Click the [Yes]
button.
3. Delete [PICTRO SCSI Port].
In the [Printers] folder window, click [Server Properties] from
the [File] menu.
The [Print Server Properties] dialog box is displayed.
4. Click the [Ports] tab.
Click [PICTRO SCSI:] in the list of [Ports on this Server],
and then click the [Delete Port] button.
You will be prompted to confirm the deletion. Click the [Yes]
button.
This completes the uninstall of the printer driver.
3.5 Windows XP
Note the following when installing the printer driver in Windows XP:
* You must be logged on as a user assigned to the Administration
Group.
* In the [What action do you want Windows to take?] field in
the [Driver Signing Options] dialog box, check to make sure
that either [Ignore - Install the software anyway and don’t
ask for my approval] or [Warn - Prompt me each time to
choose an action] is specified. To display the [Driver Signing
Options] dialog box, click the [Control Panel] > [System] >
[Hardware] tabs, then click the [Driver Signing] button.