FRIGIDAIRE 309000848 - Manual (Page 8)

8
Air Conditioner Features
(continued)
YOU WILL SEE:
STEP 5 — TO OPERATE
ON FAN ONLY:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
DO THIS:
PRESS ON
(if not running)
PRESS
FAN ONLY
CHOOSE ONE
☞ ☞ ☞
☞
DO THIS:
PRESS
ENERGY SAVER
YOU WILL SEE:
STEP 6 — TO USE THE
ENERGY SAVER FEATURE:
☞
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until
cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether
cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.
DO THIS:
PRESS
(if unit is not
running)
PRESS
YOU WILL SEE:
STEP 7 — TIMER-DELAY
STOP FEATURE
Note: The unit must be running to make this setting.
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.
☞
☞
72
72
72 0.5