Farallon Communications 8-Port 10/100M - Manual (Page 4)

00110101001001000011110001010100101101101011101001101001 00100100001111000101010010110110101110100110100100110101 01001000011110001010100101101101011101001101001001101010 10000111100010101001011011010111010011010010011010100100
4
1. Uplink
The Uplink port is used to connect to other switches or
hubs. The Uplink port is shared with the port #1.
2. RJ-45 Ports
Eight shielded RJ-45 ports, all come with auto-negotiation
and operate at 10/100Mbps for connection to servers
and hubs. All ports can be configurated for Full/Half-
Duplex mode.
3. Power Connector
For the external 7.5V DC power adapter that connects
to the power outlet.
Rear Panel
Network Connection
The following figures illustrate the connections of the 8-
Port N-Way Mini Switch.
PC to Switch
A PC can be connected to the 8-Port N-Way Mini Switch via
a two-pair Category 3/4/5 UTP/STP straight cable. The PC
(equipped with a RJ-45 100/10Mbps jack) should be
connected to any of the eight ports.
The 8-Port N-Way Mini Switch
RJ 45 jack